BH33-1010 wall mounted eye wash
l Shower: Pull down the lever, and the shower water will be sprayed from the shower basin within 1 second, and the shower flow rate is 120-180L/min.
l lEye wash: Push open the handle, the aerosol eyewash is sprayed within 1 second, the height and angle of the water are designed according to the proportion of the human face, and the eyewash flow is 12-18L/min. The on-site water pressure needs to reach 0.25-0.4MPA.
l lBall valve: The two-piece ball valve can make the water flow of the eyewash device more in line with American standards.
l lEye wash assembly: It is composed of 304 casting parts. The 90-degree elbow adopts seamless pipe without welding seam, which will not cause the pipe wall to burst due to water pressure during use.
l Adjustable flow: according to the different water pressure of each equipment installation location, the flow can be manually adjusted to the best eyewash flow
l High-density filtration requirements: 4-layer filter screen, protection upgrade, use more peace of mind
l lPerformance: It has good resistance to acid, alkali, salt, oil and other corrosive solutions.
l lFunction: Used in petroleum, chemical, beverage, pharmaceutical and other industries, when chemical liquids, toxic and hazardous substances, and fires are splashed on the body, face, and eyes of the staff, it can be rinsed quickly to reduce the degree of harm.
l lStandard: in line with the American ANSIZ358.1.2014 standard.