page_banner

PRODUCTS

BH30-1316 Eyewash (Standard Type 316)

Short Description:


Product Detail

Product Tags

l  Shower: Pull down the lever, and the shower water will be sprayed from the shower basin within 1 second, and the shower flow rate is 120-180L/min.

lEye wash: Push open the handle, the aerosol eyewash is sprayed within 1 second, the height and angle of the water are designed according to the proportion of the human face, and the eyewash flow is 12-18L/min. The on-site water pressure needs to reach 0.25-0.4MPA.

lEye wash strainer: high-density PP+304 double-layer strainer, which can filter impurities in the water, and the sprayed water is aerosol, enveloping and gentle.

lBall valve: The two-piece ball valve can make the water flow of the eyewash device more in line with American standards.

lEye wash assembly: It is composed of 316 casting parts. The 90-degree elbow adopts seamless pipe without welding seam, which will not cause the pipe wall to burst due to water pressure during use.

lBase: Die-casting parts, high-strength and pressure-resistant, the picture is yellow aluminum alloy.

lWater inlet and outlet: 1.2-inch internal thread connection, middle inlet and underwater drainage.

lPerformance: It has good resistance to acid, alkali, salt, oil and other corrosive solutions.

lFunction: Used in petroleum, chemical, beverage, pharmaceutical and other industries, when chemical liquids, toxic and hazardous substances, and fires are splashed on the body, face, and eyes of the staff, it can be rinsed quickly to reduce the degree of harm.

Luminous hand push plate: The start switch of the eyewash has a luminous logo, which is convenient for guiding the injured at night to find and start the equipment in time

lStandard: in line with the American ANSIZ358.1.2014 standard.


  • Previous:
  • Next:

  • Write your message here and send it to us