BH32-1062B pedestal electric heating eye wash
l Material: Main body 304 stainless steel, ABS plastic flame-retardant shell.
l Eyewash: working pressure 0.25-0.6MPA. Push the handle open, and the aerosol eyewash water will be sprayed within 1 second. The height and angle of the water outlet are designed according to the proportion of the human face. The eyewash flow rate is ≧11.4L/min.
l Eyewashing filter: high-density PP+304 double-layer filter, which can filter impurities in the water, and the sprayed water is aerosol, enveloping and gentle.
l Ball valve: The two-piece ball valve can make the water flow of the eyewash device meet the American standard.
l Eyewasher assembly: It is composed of 304 casting parts. The 90-degree elbow adopts seamless pipe and has no welded seam, which will not cause the pipe wall to burst due to water pressure during use.
l Water inlet and outlet: 1.2 inch threaded connection. Drainage under water can also be customized according to customer requirements.
l Sound and light alarm function: when an accident occurs, when the user is using the eyewash device, the sound and light alarm will be automatically activated, making the rescue more timely.
l Heating device: The electric heating device is equipped with a temperature control switch or a fully automatic system to control the heating temperature or start the switch. It can effectively increase the water temperature of the eyewash water by about 15 degrees and the shower temperature by 2.8 degrees.
l Electric heating power: 15KW, voltage 380V.
l Explosion-proof protection level: can be configured according to customer requirements;
l Empty antifreeze device: The unheated part of the eyewash has an automatic emptying function to prevent freezing. The electric heating eyewash has the effect of heating, heat preservation and antifreeze, and it cannot increase the temperature of the eyewash water. It is suitable for use in areas where the temperature is lower than 0℃. (Electric heating cable 48W/M, equipped with 8M electric heating cable, the power of the electric heating cable is 384W/M)
l Insulation layer: environmentally friendly rubber and plastic materials. Outer layer: warning yellow ABS material, which can better resist the corrosion of various chemicals, and the detachable shell is convenient for maintenance. At the same time, a concave-convex embedded shell is used for better protection
l Performance: It has high resistance to acid, alkali, salt, oil and other corrosive solutions.
l Function: Used in petroleum, chemical, beverage, pharmaceutical and other industries, when chemical liquids, toxic and hazardous substances, and fires are splashed on the body, face, and eyes of the staff, it can be rinsed quickly to reduce the degree of harm.
l Standard: in line with the American ANSIZ358.1.2009 standard.