BH30-1062 Electric heat tracing eyewash(Yellow)
●Material: Main body 304 stainless steel, ABS plastic flame-retardant shell.
●Shower: Pull the pull-down lever, and the shower water will be sprayed from the shower basin within 1 second, and the shower flow rate is ≧75.7L/min. Working pressure is 0.25-0.4MPA.
●Eyewash: working pressure 0.25-0.6MPA. Push the handle open, and the aerosol eyewash water will be sprayed within 1 second. The height and angle of the water outlet are designed according to the proportion of the human face. The eyewash flow rate is ≧11.4L/min.
●Eye wash strainer: high-density PP+304 double-layer strainer, which can filter impurities in the water, and the sprayed water is aerosol, enveloping and gentle.
●Ball valve: The two-piece ball valve can make the water flow of the eyewash device meet the American standard.
●Eye wash assembly: It is composed of 304 casting parts. The 90-degree elbow adopts seamless pipe and has no welded seam, which will not cause the pipe wall to burst due to water pressure during use.
●Sound and light alarm function: when an accident occurs, when the user is using the eyewash device, the sound and light alarm will be automatically activated, making the rescue more timely.
●Water inlet and outlet: 1.2 inch threaded connection. Drainage under water can also be customized according to customer requirements.
●Insulation layer: environmentally friendly rubber and plastic materials. Outer layer: warning yellow flame-retardant ABS material, which can resist the corrosion of various chemicals and is more convenient to disassemble.
●Explosion-proof protection level: can be configured according to customer requirements;
●DCS Signal upload function: When a user uses the eyewash, it indicates that an accident has occurred, and immediately transmits the signal to the control room through the DCS signal upload function, reminding security and related personnel at any time
●Performance: It has high resistance to acid, alkali, salt, oil and other corrosive solutions.
●Function: Used in petroleum, chemical, beverage, pharmaceutical and other industries, when chemical liquids, toxic and hazardous substances, and fires are splashed on the body, face, and eyes of the staff, it can be rinsed quickly to reduce the degree of harm.
●Standard: in line with the American ANSIZ358.1.2009 standard.