page_banner

products

Mobile Portable Eyewash

Our pursuit and company goal is to "Always satisfy our customer requirements". We continue to develop and design superior quality products for both our old and new customers and achieve a win-win prospect for our clients as well as us for Mobile Portable Eyewash, Recycled Water, Portable Eyewash Bucket, Electric Heating Eyewash Station, Our mission is to help you create long-lasting relationships with your clients through the power of promotional products. High quality Initial,and Buyer Supreme is our guideline to offer the ideal assistance to our shoppers.At present, we are striving our best to become amongst the ideal exporters inside our industry to satisfy shoppers more want for Mobile Portable Eyewash, We have more than 100 works in the plant, and we also have a 15 guys work team to service our customers for before and after sales. Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!


  • Eye wash room

    Eye wash room

    304 stainless steel plate is made by bending, the thickness is 1.2mm. Continuous use for 15 minutes without spillover.

    External size 1000*900*2400mm (length * width * height).

    It has good resistance to oil, acid, alkali and salt solution.

    It can be used with vertical and composite eyewash device.

    Upper intake,5/4 thread connection MNPT, outlet 150mm above ground,3/2 thread connection FNPT or flange connection.

  • Antifreeze eye washer (pedal type)

    Antifreeze eye washer (pedal type)

    Pedal compound automatic emptiness compound eyewash, light and simple, can automatically emptiness the internal residual water of eyewash, economical and practical.

    Eye assembly adopts the three sections of 304 stainless steel + ABS yellow epoxy resin, the seamless steel tube mould casting integrated molding, smooth surface, strong pressure resistance, long service life, the eye on market basic section are ten piece welding assembly, weld, surface coarse, working under pressure is not pressure, easy to crack pipe leakage, short service life.

  • Compound shower eyewash

    Compound shower eyewash

    The compound eyewash device can open the eyewash part and the shower part separately, or open the eyewash and shower at the same time. The eyewash part and the shower are on the same side.

  • Comprehensive eye wash station

    Comprehensive eye wash station

    The warm water circulation eyewash station is suitable for the simultaneous use of multiple eyewash devices, ensuring the outlet water temperature between 15.7-37.8 degrees. The system uses a large storage tank, providing water supply of 71 gal/min, which can provide water for single or multiple eyewash devices, ensuring the water consumption time is more than 15 minutes.

  • Electric heat tracing eye washer

    Electric heat tracing eye washer

    Electric heat wash device is suitable for the north 0 degrees below the use of the area. It is also suitable for use in areas where the temperature is higher than -45℃. The power of electric tracing belt is 6 M *48W/M. Automatic thermostatic control for the companion zone. There is a temperature controller to control the heating power of the heating belt to ensure the water temperature. Explosion-proof level: ExdIICT4, IP65 protection. The power supply junction box of electric tracing belt is arranged separately from the temperature control junction box. The thickness of the tropical insulation layer is 30MM, and the insulation material is flame retardant rubber. Voltage: AC220V/1PH/ 50Hz.

  • Electric heating eye washer

    Electric heating eye washer

    Electric heating eye wash device is based on electric heat tracing eye wash device, suitable for use in areas with temperature below 0 degrees, can effectively improve the water temperature of eye wash about 15 degrees.

    The eyewash itself has the function of heat tracing, insulation and antifreeze, so that the water temperature of the eyewash system is kept at a constant temperature. Heating device: imported constant temperature electric tracing belt is adopted and equipped with automatic temperature control system to control the heating temperature. Insulation layer: environment-friendly rubber material. Cover: warning yellow ABS material, resistant to corrosion by various chemicals.

  • Buried double rod eye washer

    Buried double rod eye washer

    The water inlet and emptied device of the buried eyewash is installed below the permafrost. Open the valve, and the tap water flows into the eyewash system from the underground water inlet. Close the valve, and the system can automatically emptied the water in the eyewash pipe. Applicable to the winter below 0 degrees of the area, the depth of the permafrost is greater than 500MM to use, really play the anti-freezing effect. Patented products, counterfeiting will be prosecuted; Patent number: ZL 2012 2 0337278.7

  • Wall-mounted (desktop) eyewash device

    Wall-mounted (desktop) eyewash device

    Basic model: BH33-1010(304)

    excellent features: authentic 304 stainless steel material, containing more than 8 nickel. Standard configuration, can prevent acid, alkali, salt and other corrosive substances. Economical. The wall installed on the work site does not take up space.

    material: the main body 304 stainless steel 3, shower device: no.

  • Full automatic eye washer

    Full automatic eye washer

    Automatic eye washer realizes automatic control through photoelectric, electromagnetic control and induction control system. In case of eye injury, there is no need to control the on-off valve of the eye washer by hand. Just enter the corresponding position, the eye washer can automatically water out. More humanized design, truly realize the injured person timely, effective eye and body cleaning, more convenient and fast. The wall installed on the work site does not take up space.

  • Superior eye wash device

    Superior eye wash device

    The superior type eye wash is based on the compound eye wash, which has the functions of antifreeze and anti-hot.

    Bohua eyewash assembly is a one-time mold casting molding, smooth surface, strong compression resistance, long service life. There is no burst phenomenon in winter or high water pressure. The bad quality always becomes the welding parts, the workmanship is rough, mostly for welding, which not only affects the appearance but also reduces the service life, and it is easy to cause the expansion pipe burst in cold areas or when the water pressure is large.