Superior eye wash device
The superior type eye wash is based on the compound eye wash, which has the functions of antifreeze and anti-hot.
Bohua eyewash assembly is a one-time mold casting molding, smooth surface, strong compression resistance, long service life. There is no burst phenomenon in winter or high water pressure. The bad quality always becomes the welding parts, the workmanship is rough, mostly for welding, which not only affects the appearance but also reduces the service life, and it is easy to cause the expansion pipe burst in cold areas or when the water pressure is large.
Filter screen: the first layer of PP high density filter screen, filter the larger particles in the water impurities. The second layer adopts four layers of high density 304 stainless steel mesh staggered structure, further filter fine impurities, at the same time disperse the water, so that the water into a bubble, gentle rinse eyes, avoid impurities and strong water caused secondary damage to the eyes
Shower edge half hole design, radian respectively by R250 and R39 two smooth curves tangent, so that the shower water in the shower basin wall, along the radian spread, just at the height of 1524mm, to reach the diameter of 508mm coverage, fully meet the requirements of the American standard on the eye wash device range
The upper ball valve adopts two-piece ball valve, which is superior to one-piece ball valve, with large aperture and can meet the American standard flushing flow of eyewash device. (rinse flow ≥ 75.7L/min, eye wash flow ≥ 11.4L/min, effective and rapid rinse).